Sport Kote – Essential Industries

Author: essind-design

  • Satin Sport Kote Directions

    Directions – Satin Sport Kote – 00228SF

    General Directions**

    1. PREPARE FLOOR: NOTE: This finish is not designed for application to bare wood floors. Use only on previously sealed surfaces. Use only after proper training.
      SCRUB AND RECOAT: Dust mop floor and remove all chewing gum and labels. Prepare floor with Sport Prep (00425SF), following label directions.
      NOTE: Test previously coated floor in an inconspicuous area before recoating to determine compatibility with existing finish. Apply no more than 2 coats in 24 hours and a maximum of 3 coats in 48 hours. See finish application instructions below.
    2. APPLY FINISH: Stir gently before using. Apply at a rate of 800-1000 square feet per gallon. Use a weighted T-bar with a clean, synthetic pad. Apply thin, even coats with the grain of the wood while walking at a slow, even pace. Walking too fast may produce excessive bubbling in the finish. Allow a dry time of at least 1 hour between coats. Humid conditions require longer dry time. After the first coat has dried, apply a second coat. It may be necessary to screen the first coat if grain raising has occurred or it has dried longer than 4 hours. If so, screen the floor with a previously used 120 grit screen or maroon pad. Always vacuum and tack thoroughly after screening.
      NOTE: Check expiration date. Contact Essential for batch re-certification if expiration date is exceeded. Do not pour unused finish back into original container.
    3. MAINTAIN DAILY: Dust mop at least daily, or more as required, to keep floor dust and dirt free. Damp mop spills, salt residue, etc. with Sport Clean (01143SF) and a thoroughly wrung mop.
    4. MAINTAIN WEEKLY: If soil conditions are heavy, auto-scrub weekly with red pads and a 2 ounce per gallon dilution of Sport Clean (01143SF). Refer to the Wood Floor Care Wall Chart or Manual for further details.
      CAUTION: Do not use cleaning compounds other than Essential’s Sport Clean (01143SF) as they will reduce product performance and longevity.
    5. RESTORATION: Dust mop floor. Follow restoration directions for Sport Prep (00425SF).

    ** See label directions and MSDS for complete usage and safety instructions.

  • Sport Kote Directions

    Directions – Sport Kote – 00222SF

    General Directions**

    1. PREPARE FLOOR: NOTE: This finish is not designed for application to bare wood floors. Use only on previously sealed surfaces. Use only after proper training.
      SCRUB AND RECOAT: Dust mop floor and remove all chewing gum and labels. Prepare floor with Sport Prep (00425SF), following the label directions.
      NOTE: Test previously coated floor in an inconspicuous area before recoating to determine compatibility with existing finish. Apply no more than 2 coats in 24 hours and a maximum of 3 coats in 48 hours. See finish application instructions below.
    2. APPLY FINISH: Stir gently before using. Apply at a rate of 800-1000 square feet per gallon. Use a weighted T-bar with a clean, synthetic pad. Apply thin, even coats with the grain of the wood while walking at a slow, even pace. Walking too fast may produce excessive bubbling in the finish. Allow a dry time of at least 1 hour between coats. Humid conditions require longer dry time. After the first coat has dried, apply a second coat. It may be necessary to screen the first coat if grain raising has occurred or it has dried longer than 4 hours. If so, screen the floor with a previously used 120 grit screen or maroon pad. Always vacuum and tack thoroughly after screening.
      NOTE: Check expiration date. Contact Essential for batch re-certification if expiration date is exceeded. Do not pour unused finish back into original container.
    3. MAINTAIN DAILY: Dust mop at least daily, or more as required, to keep floor dust and dirt free. Damp mop spills, salt residue, etc. with Sport Clean (01143SF) and a thoroughly wrung mop.
    4. MAINTAIN WEEKLY: If soil conditions are heavy, auto-scrub weekly with red pads and a 2 ounce per gallon dilution of Sport Clean (01143SF). Refer to the Wood Floor Care Wall Chart or Manual for further details.
      CAUTION: Do not use cleaning compounds other than Essential’s Sport Clean (01143SF) as they will reduce product performance and longevity.
    5. RESTORATION: Dust mop floor. Follow restoration directions for Sport Prep (00425SF).

    ** See label directions and MSDS for complete usage and safety instructions.

  • Satin Sport Kote Packaging

    Packaging – Satin Sport Kote – 00228SF

    2 x 2½ Gallon:
    UPC Code: 783366228034
    Pack Size (in.): 14 x 9.5 x 15.25
    Cube (ft.): 1.17
    Pack Wt. (lbs.): 46.11
    Full Pallet: 36

  • Sport Kote Packaging

    Packaging – Sport Kote – 00222SF

    5 Gallon Pail:
    UPC Code: 783366222056
    Pack Size (in.): 12 x 14
    Cube (ft.): 1.17
    Pack Wt. (lbs.): 46.08
    Full Pallet: 36

    2 x 2½ Gallon:
    UPC Code: 783366222032
    Pack Size (in.): 14 x 9.5 x 15.25
    Cube (ft.): 1.17
    Pack Wt. (lbs.): 45.86
    Full Pallet: 36

    4 x 1 F-style Gallon:
    UPC Code: 783366222049
    Pack Size (in.): 15 x 8.75 x 12.75
    Cube (ft.): 0.97
    Pack Wt. (lbs.): 38.70
    Full Pallet: 36

  • Sport Seal Properties

    Properties* – Sport Seal – 00226SF

    • Type – Acrylic Emulsion
    • Form – Opaque Liquid
    • Odor – Bland
    • Color – Milky White
    • Weight per Gallon – 8.65 Lbs.
    • pH – 7.7 – 8.7
    • Floor Solids – 20%
    • Coverage – Up To 600 Sq. Ft. Per Gallon
    • Slip-Resistance – N/A
    • V.O.C. Content** – < 350 gm/l

    * Properties are typical and subject to usual manufacturing tolerances.

    **Not for sale in Southern California counties of Orange, Los Angeles, Riverside, and San Bernadino.